%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.8b or later) with an IEEE
%% conference paper.
%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE!
%% User assumes all risk.
%% In no event shall the IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including **
%% ** renaming them and changing author support contact information. **
%%*************************************************************************
\documentclass[conference]{IEEEtran}
\usepackage{url}
% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
\usepackage[pdftex]{graphicx}
% declare the path(s) where your graphic files are
\graphicspath{{./Images/}}
\else
\fi
% *** MATH PACKAGES ***
\usepackage{amsmath}
% *** SUBFIGURE PACKAGES ***
%\ifCLASSOPTIONcompsoc
% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
% \usepackage[caption=false,font=footnotesize]{subfig}
%\fi
% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
% for subfigure.sty, the latter of which is no longer maintained and is
% incompatible with some LaTeX packages including fixltx2e. However,
% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
% which will override IEEEtran.cls' handling of captions and this will result
% in non-IEEE style figure/table captions. To prevent this problem, be sure
% and invoke subfig.sty's "caption=false" package option (available since
% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
% handling of captions.
% Note that the Computer Society format requires a larger sans serif font
% than the serif footnote size font used in traditional IEEE formatting
% and thus the need to invoke different subfig.sty package options depending
% on whether compsoc mode has been enabled.
%
% The latest version and documentation of subfig.sty can be obtained at:
% http://www.ctan.org/pkg/subfig
\usepackage[brazilian]{babel}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{fancyhdr}
\pagestyle{fancy}
%\fancyhf{}
\chead{VI Workshop de Pós-Graduação - Engenharia de Computação - WPGEC 2017}
\renewcommand{\headrulewidth}{2pt}
\pagenumbering{gobble}
\begin{document}
%
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
\title{Paper Template - WPGEC 2017}
% conference papers do not typically use \thanks and this command
% is locked out in conference mode. If really needed, such as for
% the acknowledgment of grants, issue a \IEEEoverridecommandlockouts
% after \documentclass
% for over three affiliations, or if they all won't fit within the width
% of the page, use this alternative format:
%
\author{\IEEEauthorblockN{SHELL, M.\IEEEauthorrefmark{1};
SIMPSON, H. S.\IEEEauthorrefmark{1};
KIRK, J.\IEEEauthorrefmark{2} (Name of the Student; Supervisor; Co-Supervisor)}
\IEEEauthorblockA{\IEEEauthorrefmark{1}Sciences Laboratory - School of Electrical and Computer Engineering}
\IEEEauthorblockA{\IEEEauthorrefmark{2}Computer Laboratory - School of Digital Systems\\
E-mail: \{shell,kirk\}@usp.br, simpson@sds.usp.br}}
% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}
% make the title area
\maketitle
\thispagestyle{fancy}
% As a general rule, do not put math, special symbols or citations
% in the abstract
\renewcommand{\abstractname}{Abstract}
\begin{abstract}
Abstract here.
\end{abstract}
\renewcommand\IEEEkeywordsname{Keywords}
\begin{IEEEkeywords}
\label{Keywords}
word 1; word 2.
\end{IEEEkeywords}
%%%%Only for english article%%%%%%%%%%%%%%%%
\renewcommand\IEEEkeywordsname{Classification}
\begin{IEEEkeywords}
\label{Classification}
indicate whether the study is: undergraduate research, master's degree or doctorate degree [Only for article in English].
\end{IEEEkeywords}
\renewcommand\IEEEkeywordsname{Category}
\begin{IEEEkeywords}
\label{Category}
Indicate the state of the research (applies to Master degree/Doctorate degree):
Beginner, Intermediate ou In conclusion [Only for article in English]
\end{IEEEkeywords}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\renewcommand{\abstractname}{Resumo}
\begin{abstract}
\label{Resumo}
Resumo aqui para documento em Portugu\^{e}s.
\end{abstract}
\renewcommand\IEEEkeywordsname{Palavras-chave}
\begin{IEEEkeywords}
\label{Palavras-chave}
palavra 1; palavra 2.
\end{IEEEkeywords}
\renewcommand\IEEEkeywordsname{Classifica\c{c}\~{a}o}
\begin{IEEEkeywords}
\label{classificacao}
Indicar se o estudo \'{e}: Incia\c{c}\~{a}o cientifica, Mestrado ou Doutorado
\end{IEEEkeywords}
\renewcommand\IEEEkeywordsname{Categoria}
\begin{IEEEkeywords}
\label{Categoria}
Indicar o estado da pesquisa (aplica para Mestrado / Doutorado):
Iniciante, Intermedi\'{a}ria ou Em conclus\~{a}o
\end{IEEEkeywords}
% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle
\section{Introduction}
% no \IEEEPARstart
This demo file is intended to serve as a ``starter file''
for papers produced under \LaTeX\..
% You must have at least 2 lines in the paragraph with the drop letter
% (should never be an issue)
Maximum number of pages: 04.
Text.
Text.
Text.
Text.
\subsection{Subsection Heading Here}
Subsection text here.
Reference example using template.bib file \cite{Li:2010, Alcaraz:2010}.
Reference example \cite{Intanagonwiwat:2000}.
Reference example \cite{Ibnkahla:2012}.
Reference example \cite{Afzal:2015}
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
\subsubsection{Subsubsection Heading Here}
Subsubsection text here.
Text.
Text.
Text.
Text.
\begin{equation}
a + b = \phi
\label{eq:01}
\end{equation}
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Text.
Figure \ref{fig_sim} shows ...
% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label within \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
% option should be used if it is desired that the figures are to be
% displayed while in draft mode.
%
\begin{figure}[!tp]
\centering
\includegraphics[width=2.5in]{myfigure.png}
% where an .eps filename suffix will be assumed under latex,
% and a .pdf suffix will be assumed for pdflatex; or what has been declared
% via \DeclareGraphicsExtensions.
\caption{Simulation results for the network.}
\label{fig_sim}
\end{figure}
% Note that the IEEE typically puts floats only at the top, even when this
% results in a large percentage of a column being occupied by floats.
% An example of a double column floating figure using two subfigures.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command,
% and the \label for the overall figure must come after \caption.
% \hfil is used as a separator to get equal spacing.
% Watch out that the combined width of all the subfigures on a
% line do not exceed the text width or a line break will occur.
%
%\begin{figure*}[!t]
%\centering
%\subfloat[Case I]{\includegraphics[width=2.5in]{box}%
%\label{fig_first_case}}
%\hfil
%\subfloat[Case II]{\includegraphics[width=2.5in]{box}%
%\label{fig_second_case}}
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure*}
%
% Note that often IEEE papers with subfigures do not employ subfigure
% captions (using the optional argument to \subfloat[]), but instead will
% reference/describe all of them (a), (b), etc., within the main caption.
% Be aware that for subfig.sty to generate the (a), (b), etc., subfigure
% labels, the optional argument to \subfloat must be present. If a
% subcaption is not desired, just leave its contents blank,
% e.g., \subfloat[].
Text.
Text.
Text.
Text.
Text.
Text.
% An example of a floating table. Note that, for IEEE style tables, the
% \caption command should come BEFORE the table and, given that table
% captions serve much like titles, are usually capitalized except for words
% such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to
% and up, which are usually not capitalized unless they are the first or
% last word of the caption. Table text will default to \footnotesize as
% the IEEE normally uses this smaller font for tables.
% The \label must come after \caption as always.
%
\begin{table}[!tp]
%% increase table row spacing, adjust to taste
%\renewcommand{\arraystretch}{1.3}
% if using array.sty, it might be a good idea to tweak the value of
% \extrarowheight as needed to properly center the text within the cells
\caption{An Example of a Table}
\label{table_example}
\centering
%% Some packages, such as MDW tools, offer better commands for making tables
%% than the plain LaTeX2e tabular which is used here.
\begin{tabular}{c|c}
\hline
\textbf{Number} & \textbf{Description} \\
\hline
Number 1 & Description 1 \\
\hline
Number 2 & Description 2\\
\hline
\end{tabular}
\end{table}
% Note that the IEEE does not put floats in the very first column
% - or typically anywhere on the first page for that matter. Also,
% in-text middle ("here") positioning is typically not used, but it
% is allowed and encouraged for Computer Society conferences (but
% not Computer Society journals). Most IEEE journals/conferences use
% top floats exclusively.
% Note that, LaTeX2e, unlike IEEE journals/conferences, places
% footnotes above bottom floats. This can be corrected via the
% \fnbelowfloat command of the stfloats package.
\section{Conclusion}
The conclusion goes here.
% conference papers do not normally have an appendix
% use section* for acknowledgment
\section*{Acknowledgment}
The authors would like to thank...
% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}
% references section
% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://mirror.ctan.org/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
%\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
%\bibliography{IEEEabrv,../bib/paper}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
%Use BIB file
\bibliographystyle{abntex2-num}
\bibliography{template}
% that's all folks
\end{document}
