%=============================================================================
%Indian Institute of Remote Sensing, Dehradun
%Major Project Thesis Template for IIRS, Dehradun
%by Manaruchi Mohapatra
%Contact - manaruchimohapatra@gmail.com
%=============================================================================
\documentclass[
12pt, % The default document font size, options: 10pt, 11pt, 12pt
%oneside, % Two side (alternating margins) for binding by default, uncomment to switch to one side
english,
onehalfspacing, % Single line spacing, alternatives: onehalfspacing or doublespacing
%draft, % Uncomment to enable draft mode (no pictures, no links, overfull hboxes indicated)
%nolistspacing, % If the document is onehalfspacing or doublespacing, uncomment this to set spacing in lists to single
%liststotoc, % Uncomment to add the list of figures/tables/etc to the table of contents
%toctotoc, % Uncomment to add the main table of contents to the table of contents
%parskip, % Uncomment to add space between paragraphs
%nohyperref, % Uncomment to not load the hyperref package
headsepline, % Uncomment to get a line under the header
%chapterinoneline, % Uncomment to place the chapter title next to the number on one line
%consistentlayout, % Uncomment to change the layout of the declaration, abstract and acknowledgements pages to match the default layout
]{MastersDoctoralThesis} % The class file specifying the document structure
\usepackage[utf8]{inputenc} % Required for inputting international characters
\usepackage[T1]{fontenc} % Output font encoding for international characters
\usepackage{amsmath}
\usepackage{mathpazo} % Use the Palatino font by default
\usepackage{adjustbox}
\usepackage[backend=bibtex,style=authoryear,natbib=true]{biblatex} % Use the bibtex backend with the authoryear citation style (which resemauthoryearbles APA)
\addbibresource{example.bib} % The filename of the bibliography
\usepackage[autostyle=true]{csquotes} % Required to generate language-dependent quotes in the bibliography
%----------------------------------------------------------------------------------------
% MARGIN SETTINGS
%----------------------------------------------------------------------------------------
\geometry{
paper=a4paper, % Change to letterpaper for US letter
inner=2.5cm, % Inner margin
outer=2.5cm, % Outer margin
bindingoffset=.5cm, % Binding offset
top=1.5cm, % Top margin
bottom=1.5cm, % Bottom margin
%showframe, % Uncomment to show how the type block is set on the page
}
%----------------------------------------------------------------------------------------
% THESIS INFORMATION
%----------------------------------------------------------------------------------------
\thesistitle{TITLE OF THE THESIS GOES HERE} % Your thesis title, this is used in the title and abstract, print it elsewhere with \ttitle
\supervisor{Supervisor Name} % Your supervisor's name, this is used in the title page, print it elsewhere with \supname
\examiner{} % Your examiner's name, this is not currently used anywhere in the template, print it elsewhere with \examname
\degree{Master of Technology in Remote Sensing and Geographical Information System with specialization in Water Resources} % Your degree name, this is used in the title page and abstract, print it elsewhere with \degreename
\author{Author Name} % Your name, this is used in the title page and abstract, print it elsewhere with \authorname
\addresses{} % Your address, this is not currently used anywhere in the template, print it elsewhere with \addressname
\subject{Remote Sensing and GIS (<Specialization Here>)} % Your subject area, this is not currently used anywhere in the template, print it elsewhere with \subjectname
\keywords{} % Keywords for your thesis, this is not currently used anywhere in the template, print it elsewhere with \keywordnames
\AtBeginDocument{
\hypersetup{pdftitle=\ttitle} % Set the PDF's title to your title
\hypersetup{pdfauthor=\authorname} % Set the PDF's author to your name
\hypersetup{pdfkeywords=\keywordnames} % Set the PDF's keywords to your keywords
\hypersetup{linkcolor=black}
}
\begin{document}
\frontmatter % Use roman page numbering style (i, ii, iii, iv...) for the pre-content pages
\pagestyle{plain}
%----------------------------------------------------------------------------------------
% TITLE PAGE
%----------------------------------------------------------------------------------------
\newpage
\begin{titlepage}
\begin{center}
\begin{center}
\Large{\textbf{\textcolor{black}{TITLE OF THE THESIS GOES HERE}}}\\
\vspace*{0.02\textheight}
\normalsize{\textbf{Thesis submitted to Andhra University, Visakhapatnam for partial fulfilment of the requirements for the award of the degree of Master of Technology in Remote Sensing and Geographic Information System}}\\
\vspace*{0.02\textheight}
\includegraphics[scale=0.37]{Figures/andhrauniv.png}\\
\vspace*{0.02\textheight}
\large{\emph{Submitted by}}\\
\vspace*{0.01\textheight}
\large{\textbf{Author Name}}\\
\vspace*{0.02\textheight}
\large{\emph{Supervisors}}\\
\begin{table}[h]
\centering
\begin{tabular}{l l}
\multicolumn{1}{p{6cm}}{\centering \large{\textbf{Supervisor 1 Name}}} & \multicolumn{1}{p{6cm}}{\centering \large{\textbf{Supervisor 2 Name}}} \\
\multicolumn{1}{p{6cm}}{\centering Designation} & \multicolumn{1}{p{6cm}}{\centering Designation}\\
\multicolumn{1}{p{6cm}}{\centering Department Name} & \multicolumn{1}{p{6cm}}{\centering Department Name}\\
\multicolumn{1}{p{6cm}}{\centering IIRS, Dehradun} & \multicolumn{1}{p{6cm}}{\centering IIRS, Dehradun}\\
\end{tabular}
\end{table}
\end{center}
\vspace*{0.02\textheight}
\includegraphics[scale=0.35]{isrologo.png}\\
\textbf{Indian Institute of Remote Sensing}\\ % University name
Indian Space Research Organisation, \\
Department of Space, Government of India,\\
Dehradun – 248001\\
\vspace*{0.02\textheight}
{\Large \textbf{August, 2020}}\\[4cm] % Date
\vfill
\end{center}
\end{titlepage}
\cleardoublepage
\newpage
%----------------------------------------------------------------------------------------
% DISCLAIMER PAGE
%----------------------------------------------------------------------------------------
\vspace*{0.2\textheight}
\vfill
\begin{center}
\large{\textbf{DISCLAIMER}}
\end{center}
This document describes the work carried out in partial fulfilment of the requirements for the award of the degree of Master of Technology in Remote Sensing and Geographic Information System by Andhra University, Visakhapatnam. The work is carried out at Indian Institute of Remote Sensing, ISRO, Dehradun. All views and opinions expressed therein remain the sole responsibility of the author and do not necessarily represent those of the Institute.
\cleardoublepage
\newpage
%\vspace*{0.02\textheight}
\begin{center}
\LARGE{\textbf{DECLARATION}}
\end{center}
\vspace*{0.01\textheight}
I hereby declare that the work presented in this M.Tech. thesis entitled \textbf{Title of Thesis Goes Here} has been carried out by me and further declare that it has not been submitted earlier in part or in whole to any University or Institution for the award of any Degree or Diploma. The work embodied in this thesis has been carried out at Indian Institute of Remote Sensing (IIRS), ISRO, Dehradun under the supervision of Supervisor 1, Designation, Department, IIRS and Supervisor 2, Designation, Department, IIRS. The extent of information derived from the existing literature has been indicated in the body of the thesis at appropriate places giving the source of information.
\vspace*{0.05\textheight}
\begin{flushright}
\textbf{Author Name}
\end{flushright}
\vspace*{0.05\textheight}
Place: Dehradun
\vspace*{0.01\textheight}
Date:
\cleardoublepage
\newpage
%----------------------------------------------------------------------------------------
% CERTIFICATE PAGE
%----------------------------------------------------------------------------------------
%\vspace*{0.07\textheight}
\begin{center}
\LARGE{\textbf{CERTIFICATE}}
\end{center}
\vspace*{0.01\textheight}
This is to certify that the work reported in this thesis entitled \textbf{Title of Thesis Goes Here} has been carried out by \textbf{Author Name} in partial fulfilment of the requirement for the award of the degree of \textbf{Master of Technology (M.Tech.) in Remote Sensing and Geographic Information System (GIS)} with specialisation in \textbf{Water Resources} (2018-2020 batch). The work has been carried out in Water Resources Department (WRD) of Indian Institute of Remote Sensing (IIRS), ISRO, Dehradun under the guidance of Supervisor 1, Designation, Department, IIRS and Supervisor 2, Designation, Department, IIRS.
\vspace*{0.2\textheight}
\begin{table}[h]
\centering
\begin{tabular}{c c c}
\textbf{---------------------------------------} & &
\textbf{---------------------------------------} \\
\textbf{Supervisor 1} & & \textbf{Supervisor 2} \\
Designation & & Designation \\
Department & & Department \\
IIRS, Dehradun & & IIRS, Dehradun \\
\end{tabular}
\end{table}
\vspace*{0.1\textheight}
\begin{table}[h]
\centering
\begin{tabular}{c c c}
\textbf{---------------------------------------} & &
\textbf{---------------------------------------} \\
\textbf{Name of Group Head} & & \textbf{Name of Dean} \\
Group Head & & Dean (Academics) \\
Department & & IIRS, Dehradun \\
IIRS, Dehradun & & \\
\end{tabular}
\end{table}
\cleardoublepage
%----------------------------------------------------------------------------------------
% DECLARATION PAGE
%----------------------------------------------------------------------------------------
\begin{center}
\LARGE{\textbf{Acknowledgements}}
\end{center}
Acknowledgement Goes Here...
%----------------------------------------------------------------------------------------
% ACKNOWLEDGEMENTS
%----------------------------------------------------------------------------------------
%----------------------------------------------------------------------------------------
% LIST OF CONTENTS/FIGURES/TABLES PAGES
%----------------------------------------------------------------------------------------
\tableofcontents % Prints the main table of contents
\listoffigures % Prints the list of figures
\listoftables % Prints the list of tables
\cleardoublepage
\newpage
% Add the abstract to the table of contents
\begin{center}
\LARGE{\textbf{ABSTRACT}}
\end{center}
Abstract goes here...
\vspace*{0.02\textheight}
\emph{\textbf{Keywords: } Keyword 1, Keyword 2, Keyword 3}
%----------------------------------------------------------------------------------------
% ABBREVIATIONS
%----------------------------------------------------------------------------------------
\begin{abbreviations}{ll} % Include a list of abbreviations (a table of two columns)
\textbf{LAH} & \textbf{L}ist \textbf{A}bbreviations \textbf{H}ere\\
\textbf{WSF} & \textbf{W}hat (it) \textbf{S}tands \textbf{F}or\\
\end{abbreviations}
%----------------------------------------------------------------------------------------
% PHYSICAL CONSTANTS/OTHER DEFINITIONS
%----------------------------------------------------------------------------------------
\begin{constants}{lr@{${}={}$}l} % The list of physical constants is a three column table
% The \SI{}{} command is provided by the siunitx package, see its documentation for instructions on how to use it
Speed of Light & $c_{0}$ & \SI{2.99792458e8}{\meter\per\second} (exact)\\
Constant Name & $Symbol$ & $Constant Value$ with units\\
\end{constants}
%----------------------------------------------------------------------------------------
% SYMBOLS
%----------------------------------------------------------------------------------------
\begin{symbols}{lll} % Include a list of Symbols (a three column table)
Symbol & Name & Unit \\
$a$ & distance & \si{\meter} \\
$P$ & power & \si{\watt} (\si{\joule\per\second}) \\
\end{symbols}
%----------------------------------------------------------------------------------------
% DEDICATION
%----------------------------------------------------------------------------------------
%\cleardoublepage
\newpage
\vspace*{0.25\textheight}
\begin{center}
\huge{\emph{\textbf{Dedicated to my family,}}}\\
\vspace*{0.05\textheight}
\LARGE{\emph{Person 1 \\
Person 2\\
Person 3\\
Person 4}}
\end{center}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - CHAPTERS
%----------------------------------------------------------------------------------------
\mainmatter % Begin numeric (1,2,3...) page numbering
\pagestyle{thesis} % Return the page headers back to the "thesis" style
% Include the chapters of the thesis as separate files from the Chapters folder
% Uncomment the lines as you write the chapters
\include{Chapters/Chapter1}
\include{Chapters/Chapter2}
\include{Chapters/Chapter3}
\include{Chapters/Chapter4}
\include{Chapters/Chapter5}
\include{Chapters/Chapter6}
%----------------------------------------------------------------------------------------
% THESIS CONTENT - APPENDICES
%----------------------------------------------------------------------------------------
\appendix % Cue to tell LaTeX that the following "chapters" are Appendices
% Include the appendices of the thesis as separate files from the Appendices folder
% Uncomment the lines as you write the Appendices
\include{Appendices/AppendixA}
%\include{Appendices/AppendixB}
%\include{Appendices/AppendixC}
%----------------------------------------------------------------------------------------
% BIBLIOGRAPHY
%----------------------------------------------------------------------------------------
\renewcommand{\bibname}{References}
\begin{thebibliography}{200} % 100 is a random guess of the total number of
%references
\addtolength{\leftmargin}{0.2in} % sets up alignment with the following line.
\setlength{\itemindent}{-0.2in}
\makeatletter
\def\@biblabel#1{}
\makeatother
\bibitem{And2006}Adam, J. C., Haddeland, I., Su, F., \& Lettenmaier, D. P. (2007). Simulation of reservoir influences on annual and seasonal streamflow changes for the Lena, Yenisei, and Ob’ rivers. \emph{Journal of Geophysical Research: Atmospheres}, 112(D24). https://doi.org/10.1029/2007JD008525
\end{thebibliography}
%----------------------------------------------------------------------------------------
\end{document}