%%________________________________________________%%
%% Journal of Applied Instrumentation and Control (JAIC)
%% https://periodicos.utfpr.edu.br/bjic
%
%─────────────────────────────────────────────────────────
%─────────██████─██████████████─██████████─██████████████─
%─────────██░░██─██░░░░░░░░░░██─██░░░░░░██─██░░░░░░░░░░██─
%─────────██░░██─██░░██████░░██─████░░████─██░░██████████─
%─────────██░░██─██░░██──██░░██───██░░██───██░░██─────────
%─────────██░░██─██░░██████░░██───██░░██───██░░██─────────
%─────────██░░██─██░░░░░░░░░░██───██░░██───██░░██─────────
%─██████──██░░██─██░░██████░░██───██░░██───██░░██─────────
%─██░░██──██░░██─██░░██──██░░██───██░░██───██░░██─────────
%─██░░██████░░██─██░░██──██░░██─████░░████─██░░██████████─
%─██░░░░░░░░░░██─██░░██──██░░██─██░░░░░░██─██░░░░░░░░░░██─
%─██████████████─██████──██████─██████████─██████████████─
%─────────────────────────────────────────────────────────
%%
%% Editor Chef:
%% Dr. Sergio Luiz Stevan Jr,
%% Federal University of Technology of Paraná
%% UTFPR, Ponta Grossa/PR, Brazil
%%
%% Template adapted by:
%% Dr. Daniel Prado Campos
%% Federal University of Technology of Paraná
%% UTFPR, Apucarana/PR, Brazil
%% https://www.researchgate.net/profile/Daniel_Campos12
%%________________________________________________%%
%% bare_jrnl.tex
%% V1.4b
%% 2015/08/26
%% by Michael Shell
%% see http://www.michaelshell.org/
%% for current contact information.
%%
%% This is a skeleton file demonstrating the use of IEEEtran.cls
%% (requires IEEEtran.cls version 1.8b or later) with an IEEE
%% journal paper.
%%*************************************************************************
%% Legal Notice:
%% This code is offered as-is without any warranty either expressed or
%% implied; without even the implied warranty of MERCHANTABILITY or
%% FITNESS FOR A PARTICULAR PURPOSE!
%% User assumes all risk.
%% In no event shall the IEEE or any contributor to this code be liable for
%% any damages or losses, including, but not limited to, incidental,
%% consequential, or any other damages, resulting from the use or misuse
%% of any information contained here.
%%
%% All comments are the opinions of their respective authors and are not
%% necessarily endorsed by the IEEE.
%%
%% This work is distributed under the LaTeX Project Public License (LPPL)
%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
%% distributed and modified. A copy of the LPPL, version 1.3, is included
%% in the base LaTeX documentation of all distributions of LaTeX released
%% 2003/12/01 or later.
%% Retain all contribution notices and credits.
%% ** Modified files should be clearly indicated as such, including **
%% ** renaming them and changing author support contact information. **
%%***********************************************************************
\documentclass[journal]{IEEE_JAIC}
%
% If IEEEtran.cls has not been installed into the LaTeX system files,
% manually specify the path to it like:
% \documentclass[journal]{../sty/IEEEtran}
% Some very useful LaTeX packages include:
% (uncomment the ones you want to load)
% *** MISC UTILITY PACKAGES ***
%
%\usepackage{ifpdf}
% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
% compilation based on whether the output is pdf or dvi.
% usage:
% \ifpdf
% % pdf code
% \else
% % dvi code
% \fi
% The latest version of ifpdf.sty can be obtained from:
% http://www.ctan.org/pkg/ifpdf
% Also, note that IEEEtran.cls V1.7 and later provides a builtin
% \ifCLASSINFOpdf conditional that works the same way.
% When switching from latex to pdflatex and vice-versa, the compiler may
% have to be run twice to clear warning/error messages.
% *** CITATION PACKAGES ***
%
%\usepackage{cite}
% cite.sty was written by Donald Arseneau
% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
% \cite{} output to follow that of the IEEE. Loading the cite package will
% result in citation numbers being automatically sorted and properly
% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
% \cite will automatically add leading space, if needed. Use cite.sty's
% noadjust option (cite.sty V3.8 and later) if you want to turn this off
% such as if a citation ever needs to be enclosed in parenthesis.
% cite.sty is already installed on most LaTeX systems. Be sure and use
% version 5.0 (2009-03-20) and later if using hyperref.sty.
% The latest version can be obtained at:
% http://www.ctan.org/pkg/cite
% The documentation is contained in the cite.sty file itself.
% *** GRAPHICS RELATED PACKAGES ***
%
\ifCLASSINFOpdf
\usepackage[pdftex]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../pdf/}{../jpeg/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
\else
% or other class option (dvipsone, dvipdf, if not using dvips). graphicx
% will default to the driver specified in the system graphics.cfg if no
% driver is specified.
% \usepackage[dvips]{graphicx}
% declare the path(s) where your graphic files are
% \graphicspath{{../eps/}}
% and their extensions so you won't have to specify these with
% every instance of \includegraphics
% \DeclareGraphicsExtensions{.eps}
\fi
% graphicx was written by David Carlisle and Sebastian Rahtz. It is
% required if you want graphics, photos, etc. graphicx.sty is already
% installed on most LaTeX systems. The latest version and documentation
% can be obtained at:
% http://www.ctan.org/pkg/graphicx
% Another good source of documentation is "Using Imported Graphics in
% LaTeX2e" by Keith Reckdahl which can be found at:
% http://www.ctan.org/pkg/epslatex
%
% latex, and pdflatex in dvi mode, support graphics in encapsulated
% postscript (.eps) format. pdflatex in pdf mode supports graphics
% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
% not a bitmapped formats (.jpeg, .png). The IEEE frowns on bitmapped formats
% which can result in "jaggedy"/blurry rendering of lines and letters as
% well as large increases in file sizes.
%
% You can find documentation about the pdfTeX application at:
% http://www.tug.org/applications/pdftex
% *** MATH PACKAGES ***
%
%\usepackage{amsmath}
% A popular package from the American Mathematical Society that provides
% many useful and powerful commands for dealing with mathematics.
%
% Note that the amsmath package sets \interdisplaylinepenalty to 10000
% thus preventing page breaks from occurring within multiline equations. Use:
%\interdisplaylinepenalty=2500
% after loading amsmath to restore such page breaks as IEEEtran.cls normally
% does. amsmath.sty is already installed on most LaTeX systems. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/amsmath
% *** SPECIALIZED LIST PACKAGES ***
%
%\usepackage{algorithmic}
% algorithmic.sty was written by Peter Williams and Rogerio Brito.
% This package provides an algorithmic environment fo describing algorithms.
% You can use the algorithmic environment in-text or within a figure
% environment to provide for a floating algorithm. Do NOT use the algorithm
% floating environment provided by algorithm.sty (by the same authors) or
% algorithm2e.sty (by Christophe Fiorio) as the IEEE does not use dedicated
% algorithm float types and packages that provide these will not provide
% correct IEEE style captions. The latest version and documentation of
% algorithmic.sty can be obtained at:
% http://www.ctan.org/pkg/algorithms
% Also of interest may be the (relatively newer and more customizable)
% algorithmicx.sty package by Szasz Janos:
% http://www.ctan.org/pkg/algorithmicx
% *** ALIGNMENT PACKAGES ***
%
%\usepackage{array}
% Frank Mittelbach's and David Carlisle's array.sty patches and improves
% the standard LaTeX2e array and tabular environments to provide better
% appearance and additional user controls. As the default LaTeX2e table
% generation code is lacking to the point of almost being broken with
% respect to the quality of the end results, all users are strongly
% advised to use an enhanced (at the very least that provided by array.sty)
% set of table tools. array.sty is already installed on most systems. The
% latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/array
% IEEEtran contains the IEEEeqnarray family of commands that can be used to
% generate multiline equations as well as matrices, tables, etc., of high
% quality.
% *** SUBFIGURE PACKAGES ***
%\ifCLASSOPTIONcompsoc
% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
%\else
% \usepackage[caption=false,font=footnotesize]{subfig}
%\fi
% subfig.sty, written by Steven Douglas Cochran, is the modern replacement
% for subfigure.sty, the latter of which is no longer maintained and is
% incompatible with some LaTeX packages including fixltx2e. However,
% subfig.sty requires and automatically loads Axel Sommerfeldt's caption.sty
% which will override IEEEtran.cls' handling of captions and this will result
% in non-IEEE style figure/table captions. To prevent this problem, be sure
% and invoke subfig.sty's "caption=false" package option (available since
% subfig.sty version 1.3, 2005/06/28) as this is will preserve IEEEtran.cls
% handling of captions.
% Note that the Computer Society format requires a larger sans serif font
% than the serif footnote size font used in traditional IEEE formatting
% and thus the need to invoke different subfig.sty package options depending
% on whether compsoc mode has been enabled.
%
% The latest version and documentation of subfig.sty can be obtained at:
% http://www.ctan.org/pkg/subfig
% *** FLOAT PACKAGES ***
%
%\usepackage{fixltx2e}
% fixltx2e, the successor to the earlier fix2col.sty, was written by
% Frank Mittelbach and David Carlisle. This package corrects a few problems
% in the LaTeX2e kernel, the most notable of which is that in current
% LaTeX2e releases, the ordering of single and double column floats is not
% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
% single column figure to be placed prior to an earlier double column
% figure.
% Be aware that LaTeX2e kernels dated 2015 and later have fixltx2e.sty's
% corrections already built into the system in which case a warning will
% be issued if an attempt is made to load fixltx2e.sty as it is no longer
% needed.
% The latest version and documentation can be found at:
% http://www.ctan.org/pkg/fixltx2e
%\usepackage{stfloats}
% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
% the ability to do double column floats at the bottom of the page as well
% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
% LaTeX2e). It also provides a command:
%\fnbelowfloat
% to enable the placement of footnotes below bottom floats (the standard
% LaTeX2e kernel puts them above bottom floats). This is an invasive package
% which rewrites many portions of the LaTeX2e float routines. It may not work
% with other packages that modify the LaTeX2e float routines. The latest
% version and documentation can be obtained at:
% http://www.ctan.org/pkg/stfloats
% Do not use the stfloats baselinefloat ability as the IEEE does not allow
% \baselineskip to stretch. Authors submitting work to the IEEE should note
% that the IEEE rarely uses double column equations and that authors should try
% to avoid such use. Do not be tempted to use the cuted.sty or midfloat.sty
% packages (also by Sigitas Tolusis) as the IEEE does not format its papers in
% such ways.
% Do not attempt to use stfloats with fixltx2e as they are incompatible.
% Instead, use Morten Hogholm'a dblfloatfix which combines the features
% of both fixltx2e and stfloats:
%
% \usepackage{dblfloatfix}
% The latest version can be found at:
% http://www.ctan.org/pkg/dblfloatfix
%\ifCLASSOPTIONcaptionsoff
% \usepackage[nomarkers]{endfloat}
% \let\MYoriglatexcaption\caption
% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
%\fi
% endfloat.sty was written by James Darrell McCauley, Jeff Goldberg and
% Axel Sommerfeldt. This package may be useful when used in conjunction with
% IEEEtran.cls' captionsoff option. Some IEEE journals/societies require that
% submissions have lists of figures/tables at the end of the paper and that
% figures/tables without any captions are placed on a page by themselves at
% the end of the document. If needed, the draftcls IEEEtran class option or
% \CLASSINPUTbaselinestretch interface can be used to increase the line
% spacing as well. Be sure and use the nomarkers option of endfloat to
% prevent endfloat from "marking" where the figures would have been placed
% in the text. The two hack lines of code above are a slight modification of
% that suggested by in the endfloat docs (section 8.4.1) to ensure that
% the full captions always appear in the list of figures/tables - even if
% the user used the short optional argument of \caption[]{}.
% IEEE papers do not typically make use of \caption[]'s optional argument,
% so this should not be an issue. A similar trick can be used to disable
% captions of packages such as subfig.sty that lack options to turn off
% the subcaptions:
% For subfig.sty:
% \let\MYorigsubfloat\subfloat
% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
% However, the above trick will not work if both optional arguments of
% the \subfloat command are used. Furthermore, there needs to be a
% description of each subfigure *somewhere* and endfloat does not add
% subfigure captions to its list of figures. Thus, the best approach is to
% avoid the use of subfigure captions (many IEEE journals avoid them anyway)
% and instead reference/explain all the subfigures within the main caption.
% The latest version of endfloat.sty and its documentation can obtained at:
% http://www.ctan.org/pkg/endfloat
%
% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used
% later in the document, say, to conditionally put the References on a
% page by themselves.
% *** PDF, URL AND HYPERLINK PACKAGES ***
%
%\usepackage{url}
% url.sty was written by Donald Arseneau. It provides better support for
% handling and breaking URLs. url.sty is already installed on most LaTeX
% systems. The latest version and documentation can be obtained at:
% http://www.ctan.org/pkg/url
% Basically, \url{my_url_here}.
% *** Do not adjust lengths that control margins, column widths, etc. ***
% *** Do not use packages that alter fonts (such as pslatex). ***
% There should be no need to do such things with IEEEtran.cls V1.6 and later.
% (Unless specifically asked to do so by the journal or conference you plan
% to submit to, of course. )
% correct bad hyphenation here
\hyphenation{op-tical net-works semi-conduc-tor}
% Required packages by the template
\usepackage{xcolor}
\usepackage[utf8]{inputenc}
% Logo image
\usepackage{eso-pic}
\AddToShipoutPictureBG*{%
\AtPageUpperLeft{%
\hspace{45pt}
\raisebox{-170pt}{\includegraphics[width=\textwidth]{JAIC_logo.png}}
}
}
\newcommand{\placetextbox}[3]{
\setbox0=\hbox{#3}
\AddToShipoutPictureFG{ \put(\LenToUnit{#1\paperwidth},\LenToUnit{#2\paperheight}){\vtop{{\null}\makebox[0pt][c]{#3}}}
}
}
\placetextbox{0.200}{0.04}{{\color{gray}DOI: 10.3895/jaic.v8n1.11313 (a ajustar) }}
\placetextbox{0.86}{0.04}{{\color{gray}ISSN: 2318-4531}}
\begin{document}
%
% paper title
% Titles are generally capitalized except for words such as a, an, and, as,
% at, but, by, for, in, nor, of, on, or, the, to and up, which are usually
% not capitalized unless they are the first or last word of the title.
% Linebreaks \\ can be used within to get better formatting as desired.
% Do not put math or special symbols in the title.
\title{Bare Demo of Journal of Applied Instrumentation and Control (JAIC)}
%
%
% author names and IEEE memberships
% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
% a structure at a ~ so this keeps an author's name from being broken across
% two lines.
% use \thanks{} to gain access to the first footnote area
% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
% was not built to handle multiple paragraphs
%
\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
John~Doe,~\IEEEmembership{Fellow,~OSA,}
and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
\thanks{M. Shell was with the Department
of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space
\thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
\thanks{Manuscript received April 19, 2005; revised August 26, 2015.}}
% note the % following the last \IEEEmembership and also \thanks -
% these prevent an unwanted space from occurring between the last author name
% and the end of the author line. i.e., if you had this:
%
% \author{....lastname \thanks{...} \thanks{...} }
% ^------------^------------^----Do not want these spaces!
%
% a space would be appended to the last name and could cause every name on that
% line to be shifted left slightly. This is one of those "LaTeX things". For
% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
% "AB" then you have to do: "\textbf{A}\textbf{B}"
% \thanks is no different in this regard, so shield the last } of each \thanks
% that ends a line with a % and do not let a space in before the next \thanks.
% Spaces after \IEEEmembership other than the last one are OK (and needed) as
% you are supposed to have spaces between the names. For what it is worth,
% this is a minor point as most people would not even notice if the said evil
% space somehow managed to creep in.
% The paper headers
\markboth{JOURNAL OF APPLIED INSTRUMENTATION AND CONTROL}%
{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for IEEE Journals}
% The only time the second header will appear is for the odd numbered pages
% after the title page when using the twoside option.
%
% *** Note that you probably will NOT want to include the author's ***
% *** name in the headers of peer review papers. ***
% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
% you desire.
% If you want to put a publisher's ID mark on the page you can do it like
% this:
%\IEEEpubid{0000--0000/00\$00.00~\copyright~2015 IEEE}
% Remember, if you use this you must call \IEEEpubidadjcol in the second
% column for its text to clear the IEEEpubid mark.
% use for special paper notices
%\IEEEspecialpapernotice{(Invited Paper)}
% make the title area
{\maketitle}
% For peer review papers, you can put extra information on the cover
% page as needed:
% \ifCLASSOPTIONpeerreview
% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
% \fi
%
% For peerreview papers, this IEEEtran command inserts a page break and
% creates the second title. It will be ignored for other modes.
\IEEEpeerreviewmaketitle
\begin{abstract}
This document is a model and instructions for \LaTeX.
This and the IEEEtran.cls file define the components of your paper [title, text, heads, etc.]. *CRITICAL: Do Not Use Symbols, Special Characters, Footnotes,
or Math in Paper Title or Abstract.
\end{abstract}
\begin{IEEEkeywords}
component, formatting, style, styling, insert
\end{IEEEkeywords}
\section{Introduction}
This document is a model and instructions for \LaTeX.
Please observe the conference page limits.
\section{Ease of Use}
\subsection{Maintaining the Integrity of the Specifications}
The IEEEtran class file is used to format your paper and style the text. All margins,
column widths, line spaces, and text fonts are prescribed; please do not
alter them. You may note peculiarities. For example, the head margin
measures proportionately more than is customary. This measurement
and others are deliberate, using specifications that anticipate your paper
as one part of the entire proceedings, and not as an independent document.
Please do not revise any of the current designations.
\section{Prepare Your Paper Before Styling}
Before you begin to format your paper, first write and save the content as a
separate text file. Complete all content and organizational editing before
formatting. Please note sections \ref{AA}--\ref{SCM} below for more information on
proofreading, spelling and grammar.
Keep your text and graphic files separate until after the text has been
formatted and styled. Do not number text heads---{\LaTeX} will do that
for you.
\subsection{Abbreviations and Acronyms}\label{AA}
Define abbreviations and acronyms the first time they are used in the text,
even after they have been defined in the abstract. Abbreviations such as
IEEE, SI, MKS, CGS, ac, dc, and rms do not have to be defined. Do not use
abbreviations in the title or heads unless they are unavoidable.
\subsection{Units}
\begin{itemize}
\item Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used as secondary units (in parentheses). An exception would be the use of English units as identifiers in trade, such as ``3.5-inch disk drive''.
\item Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity that you use in an equation.
\item Do not mix complete spellings and abbreviations of units: ``Wb/m\textsuperscript{2}'' or ``webers per square meter'', not ``webers/m\textsuperscript{2}''. Spell out units when they appear in text: ``. . . a few henries'', not ``. . . a few H''.
\item Use a zero before decimal points: ``0.25'', not ``.25''. Use ``cm\textsuperscript{3}'', not ``cc''.)
\end{itemize}
\subsection{Equations}
Number equations consecutively. To make your
equations more compact, you may use the solidus (~/~), the exp function, or
appropriate exponents. Italicize Roman symbols for quantities and variables,
but not Greek symbols. Use a long dash rather than a hyphen for a minus
sign. Punctuate equations with commas or periods when they are part of a
sentence, as in:
\begin{equation}
a+b=\gamma\label{eq}
\end{equation}
Be sure that the
symbols in your equation have been defined before or immediately following
the equation. Use ``\ref{eq}'', not ``Eq.~\ref{eq}'' or ``equation \ref{eq}'', except at
the beginning of a sentence: ``Equation \ref{eq} is . . .''
\subsection{\LaTeX-Specific Advice}
Please use ``soft'' (e.g., \verb|\eqref{Eq}|) cross references instead
of ``hard'' references (e.g., \verb|(1)|). That will make it possible
to combine sections, add equations, or change the order of figures or
citations without having to go through the file line by line.
Please don't use the \verb|{eqnarray}| equation environment. Use
\verb|{align}| or \verb|{IEEEeqnarray}| instead. The \verb|{eqnarray}|
environment leaves unsightly spaces around relation symbols.
Please note that the \verb|{subequations}| environment in {\LaTeX}
will increment the main equation counter even when there are no
equation numbers displayed. If you forget that, you might write an
article in which the equation numbers skip from (17) to (20), causing
the copy editors to wonder if you've discovered a new method of
counting.
BibTex does not work by magic. It doesn't get the bibliographic
data from thin air but from .bib files. If you use BibTex to produce a
bibliography you must send the .bib files.
{\LaTeX} can't read your mind. If you assign the same label to a
subsubsection and a table, you might find that Table I has been cross
referenced as Table IV-B3.
{\LaTeX} does not have precognitive abilities. If you put a
\verb|\label| command before the command that updates the counter it's
supposed to be using, the label will pick up the last counter to be
cross referenced instead. In particular, a \verb|\label| command
should not go before the caption of a figure or a table.
Do not use \verb|\nonumber| inside the \verb|{array}| environment. It
will not stop equation numbers inside \verb|{array}| (there won't be
any anyway) and it might stop a wanted equation number in the
surrounding equation.
\subsection{Some Common Mistakes}\label{SCM}
\begin{itemize}
\item The word ``data'' is plural, not singular.
\item The subscript for the permeability of vacuum $\mu_{0}$, and other common scientific constants, is zero with subscript formatting, not a lowercase letter ``o''.
\item In American English, commas, semicolons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. When quotation marks are used, instead of a bold or italic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. A parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.)
\item A graph within a graph is an ``inset'', not an ``insert''. The word alternatively is preferred to the word ``alternately'' (unless you really mean something that alternates).
\item Do not use the word ``essentially'' to mean ``approximately'' or ``effectively''.
\item In your paper title, if the words ``that uses'' can accurately replace the word ``using'', capitalize the ``u''; if not, keep using lower-cased.
\item Be aware of the different meanings of the homophones ``affect'' and ``effect'', ``complement'' and ``compliment'', ``discreet'' and ``discrete'', ``principal'' and ``principle''.
\item Do not confuse ``imply'' and ``infer''.
\item The prefix ``non'' is not a word; it should be joined to the word it modifies, usually without a hyphen.
\item There is no period after the ``et'' in the Latin abbreviation ``et al.''.
\item The abbreviation ``i.e.'' means ``that is'', and the abbreviation ``e.g.'' means ``for example''.
\end{itemize}
\subsection{Authors and Affiliations}
\textbf{The class file is designed for, but not limited to, six authors.} A
minimum of one author is required for all conference articles. Author names
should be listed starting from left to right and then moving down to the
next line. This is the author sequence that will be used in future citations
and by indexing services. Names should not be listed in columns nor group by
affiliation. Please keep your affiliations as succinct as possible (for
example, do not differentiate among departments of the same organization).
\subsection{Identify the Headings}
Headings, or heads, are organizational devices that guide the reader through
your paper. There are two types: component heads and text heads.
Component heads identify the different components of your paper and are not
topically subordinate to each other. Examples include Acknowledgments and
References and, for these, the correct style to use is ``Heading 5''. Use
``figure caption'' for your Figure captions, and ``table head'' for your
table title. Run-in heads, such as ``Abstract'', will require you to apply a
style (in this case, italic) in addition to the style provided by the drop
down menu to differentiate the head from the text.
Text heads organize the topics on a relational, hierarchical basis. For
example, the paper title is the primary text head because all subsequent
material relates and elaborates on this one topic. If there are two or more
sub-topics, the next level head (uppercase Roman numerals) should be used
and, conversely, if there are not at least two sub-topics, then no subheads
should be introduced.
\subsection{Figures and Tables}
\paragraph{Positioning Figures and Tables} Place figures and tables at the top and
bottom of columns. Avoid placing them in the middle of columns. Large
figures and tables may span across both columns. Figure captions should be
below the figures; table heads should appear above the tables. Insert
figures and tables after they are cited in the text. Use the abbreviation
``Fig.~\ref{fig}'', even at the beginning of a sentence.
\begin{table}[htbp]
\caption{Table Type Styles}
\begin{center}
\begin{tabular}{|c|c|c|c|}
\hline
\textbf{Table}&\multicolumn{3}{|c|}{\textbf{Table Column Head}} \\
\cline{2-4}
\textbf{Head} & \textbf{\textit{Table column subhead}}& \textbf{\textit{Subhead}}& \textbf{\textit{Subhead}} \\
\hline
copy& More table copy$^{\mathrm{a}}$& & \\
\hline
\multicolumn{4}{l}{$^{\mathrm{a}}$Sample of a Table footnote.}
\end{tabular}
\label{tab1}
\end{center}
\end{table}
\begin{figure}[htbp]
%\centerline{\includegraphics{fig1.png}}
\caption{Example of a figure caption.}
\label{fig}
\end{figure}
Figure Labels: Use 8 point Times New Roman for Figure labels. Use words
rather than symbols or abbreviations when writing Figure axis labels to
avoid confusing the reader. As an example, write the quantity
``Magnetization'', or ``Magnetization, M'', not just ``M''. If including
units in the label, present them within parentheses. Do not label axes only
with units. In the example, write ``Magnetization (A/m)'' or ``Magnetization
\{A[m(1)]\}'', not just ``A/m''. Do not label axes with a ratio of
quantities and units. For example, write ``Temperature (K)'', not
``Temperature/K''.
\section*{Acknowledgment}
The preferred spelling of the word ``acknowledgment'' in America is without
an ``e'' after the ``g''. Avoid the stilted expression ``one of us (R. B.
G.) thanks $\ldots$''. Instead, try ``R. B. G. thanks$\ldots$''. Put sponsor
acknowledgments in the unnumbered footnote on the first page.
\section*{References}
Please number citations consecutively within brackets \cite{IEEEhowto:IEEEtranpage}. The
sentence punctuation follows the bracket \cite{IEEEhowto:IEEEtranpage}. Refer simply to the reference
number, as in \cite{IEEEhowto:IEEEtranpage}---do not use ``Ref. \cite{IEEEhowto:IEEEtranpage}'' or ``reference \cite{IEEEhowto:IEEEtranpage}'' except at
the beginning of a sentence: ``Reference \cite{IEEEhowto:IEEEtranpage} was the first $\ldots$''
Number footnotes separately in superscripts. Place the actual footnote at
the bottom of the column in which it was cited. Do not put footnotes in the
abstract or reference list. Use letters for table footnotes.
Unless there are six authors or more give all authors' names; do not use ``et al.'' \cite{IEEEexample:incollectionmanyauthors}. Papers that have not been published, even if they have been submitted for publication, should be cited as ``unpublished'' \cite{IEEEexample:unpublished}. Papers
that have been accepted for publication should be cited as ``in press'' Capitalize only the first word in a paper title, except for proper nouns and element symbols.
Another examples are: book \cite{IEEEexample:book, IEEEexample:bookwitheditor, IEEEexample:bookwitheditor}, periodical \cite{IEEEexample:periodical}, report \cite{IEEEexample:techrep}, conference \cite{IEEEexample:conf_typical, IEEEexample:confwithadddays, IEEEexample:confwithpaper, IEEEexample:confwithpapertype, IEEEexample:confwithvolume}, software document \cite{IEEEexample:softmanual}, patent \cite{IEEEexample:uspat}, article \cite{IEEEexample:article_typical, IEEEexample:articledualmonths, IEEEexample:articleetal, IEEEexample:articlelargepages}, data sheet \cite{IEEEexample:datasheet}, theses (M.S) \cite{IEEEexample:masters}, dissertation (Ph.D) \cite{IEEEexample:phdurl}, conference proceedings \cite{IEEEexample:incollection_chpp, IEEEexample:incollection, IEEEexample:incollectionmanyauthors, IEEEexample:incollectionwithseries}, standards \cite{IEEEexample:standard}, and others \cite{IEEEexample:miscforum,IEEEexample:miscrfc}.
% An example of a floating figure using the graphicx package.
% Note that \label must occur AFTER (or within) \caption.
% For figures, \caption should occur after the \includegraphics.
% Note that IEEEtran v1.7 and later has special internal code that
% is designed to preserve the operation of \label within \caption
% even when the captionsoff option is in effect. However, because
% of issues like this, it may be the safest practice to put all your
% \label just after \caption rather than within \caption{}.
%
% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
% option should be used if it is desired that the figures are to be
% displayed while in draft mode.
%
\begin{figure}[!t]
\centering
\includegraphics[width=\columnwidth]{Figure_1}
\caption{Simulation results.}
\label{fig_sim}
\end{figure}
%where an .eps filename suffix will be assumed under latex,
%and a .pdf suffix will be assumed for pdflatex; or what has been declared
%via \DeclareGraphicsExtensions.
% Note that the IEEE typically puts floats only at the top, even when this
% results in a large percentage of a column being occupied by floats.
% An example of a double column floating figure using two subfigures.
% (The subfig.sty package must be loaded for this to work.)
% The subfigure \label commands are set within each subfloat command,
% and the \label for the overall figure must come after \caption.
% \hfil is used as a separator to get equal spacing.
% Watch out that the combined width of all the subfigures on a
% line do not exceed the text width or a line break will occur.
%
%\begin{figure*}[!t]
%\centering
%\subfloat[Case I]{\includegraphics[width=2.5in]{box}%
%\label{fig_first_case}}
%\hfil
%\subfloat[Case II]{\includegraphics[width=2.5in]{box}%
%\label{fig_second_case}}
%\caption{Simulation results for the network.}
%\label{fig_sim}
%\end{figure*}
%
% Note that often IEEE papers with subfigures do not employ subfigure
% captions (using the optional argument to \subfloat[]), but instead will
% reference/describe all of them (a), (b), etc., within the main caption.
% Be aware that for subfig.sty to generate the (a), (b), etc., subfigure
% labels, the optional argument to \subfloat must be present. If a
% subcaption is not desired, just leave its contents blank,
% e.g., \subfloat[].
% An example of a floating table. Note that, for IEEE style tables, the
% \caption command should come BEFORE the table and, given that table
% captions serve much like titles, are usually capitalized except for words
% such as a, an, and, as, at, but, by, for, in, nor, of, on, or, the, to
% and up, which are usually not capitalized unless they are the first or
% last word of the caption. Table text will default to \footnotesize as
% the IEEE normally uses this smaller font for tables.
% The \label must come after \caption as always.
%
%\begin{table}[!t]
%% increase table row spacing, adjust to taste
%\renewcommand{\arraystretch}{1.3}
% if using array.sty, it might be a good idea to tweak the value of
% \extrarowheight as needed to properly center the text within the cells
%\caption{An Example of a Table}
%\label{table_example}
%\centering
%% Some packages, such as MDW tools, offer better commands for making tables
%% than the plain LaTeX2e tabular which is used here.
%\begin{tabular}{|c||c|}
%\hline
%One & Two\\
%\hline
%Three & Four\\
%\hline
%\end{tabular}
%\end{table}
% Note that the IEEE does not put floats in the very first column
% - or typically anywhere on the first page for that matter. Also,
% in-text middle ("here") positioning is typically not used, but it
% is allowed and encouraged for Computer Society conferences (but
% not Computer Society journals). Most IEEE journals/conferences use
% top floats exclusively.
% Note that, LaTeX2e, unlike IEEE journals/conferences, places
% footnotes above bottom floats. This can be corrected via the
% \fnbelowfloat command of the stfloats package.
\section{Conclusion}
The conclusion goes here.
% if have a single appendix:
%\appendix[Proof of the Zonklar Equations]
% or
%\appendix % for no appendix heading
% do not use \section anymore after \appendix, only \section*
% is possibly needed
% use appendices with more than one appendix
% then use \section to start each appendix
% you must declare a \section before using any
% \subsection or using \label (\appendices by itself
% starts a section numbered zero.)
%
\appendices
\section{Proof of the First Zonklar Equation}
Appendix one text goes here.
% you can choose not to have a title for an appendix
% if you want by leaving the argument blank
\section{}
Appendix two text goes here.
% use section* for acknowledgment
\section*{Acknowledgment}
The authors would like to thank...
% Can use something like this to put references on a page
% by themselves when using endfloat and the captionsoff option.
\ifCLASSOPTIONcaptionsoff
\newpage
\fi
% trigger a \newpage just before the given reference
% number - used to balance the columns on the last page
% adjust value as needed - may need to be readjusted if
% the document is modified later
%\IEEEtriggeratref{8}
% The "triggered" command can be changed if desired:
%\IEEEtriggercmd{\enlargethispage{-5in}}
% references section
% can use a bibliography generated by BibTeX as a .bbl file
% BibTeX documentation can be easily obtained at:
% http://mirror.ctan.org/biblio/bibtex/contrib/doc/
% The IEEEtran BibTeX style support page is at:
% http://www.michaelshell.org/tex/ieeetran/bibtex/
%\bibliographystyle{IEEEtran}
% argument is your BibTeX string definitions and bibliography database(s)
%\bibliography{IEEEabrv,../bib/paper}
%
% <OR> manually copy in the resultant .bbl file
% set second argument of \begin to the number of references
% (used to reserve space for the reference number labels box)
%\begin{thebibliography}{1}
%\bibitem{IEEEhowto:kopka}
%H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip %1em plus
% 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
%\end{thebibliography}
\bibliographystyle{IEEEtran}
\bibliography{IEEEexample}
\vspace{1cm}
\hspace{-0.5cm}
\framebox{
\parbox[b]{0.99\columnwidth}{
\addvspace{0 cm}
Received: {\color{gray} 30 May 2020};\\
Accepted: {\color{gray} 14 September 2020};\\
Published: {\color{gray} 22 September 2020};
}
}
\vspace{1cm}
\noindent
\begin{minipage}[t]{0.32\columnwidth}
\vspace{0pt}
\includegraphics[width=\linewidth]{by.png}
\end{minipage}
\begin{minipage}[t]{0.66\columnwidth}
\vspace{0pt}
\copyright~\the\year{}~by the authors. Submitted for
possible open access publication under
the terms and conditions of the Creative
\end{minipage}
\\ \\
\noindent Commons Attribution (CC-BY) license (http://creativecommons.org/licenses/by/4.0/).
\clearpage
\title{\vspace{-3cm} Título em Português}
\author{}
\maketitle
\renewcommand{\abstractname}{Resumo: }
\renewcommand{\IEEEkeywordsname}{Palavras-chave: }
\begin{abstract}
Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho. Escreva aqui o resumo em português do seu trabalho.
\end{abstract}
\begin{IEEEkeywords}
Palavras-chave em português
\end{IEEEkeywords}
% that's all folks
\end{document}