Edited on the outline of the CV by Aratikatla Umasankara Srinivasu and the Medium Length Professional CV template.
\begin
Discover why 18 million people worldwide trust Overleaf with their work.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Medium Length Professional CV
% LaTeX Template
% Version 2.0 (8/5/13)
%
% This template has been downloaded from:
% http://www.LaTeXTemplates.com
%
% Original author:
% Trey Hunner (http://www.treyhunner.com/)
%
% Important note:
% This template requires the resume.cls file to be in the same directory as the
% .tex file. The resume.cls file provides the resume style used for structuring the
% document.
%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%----------------------------------------------------------------------------------------
% PACKAGES AND OTHER DOCUMENT CONFIGURATIONS
%----------------------------------------------------------------------------------------
\documentclass{resume} % Use the custom resume.cls style
\usepackage[left=0.4 in,top=0.4in,right=0.4 in,bottom=0.4in]{geometry} % Document margins
\newcommand{\tab}[1]{\hspace{.2667\textwidth}\rlap{#1}}
\newcommand{\itab}[1]{\hspace{0em}\rlap{#1}}
\name{SHASHWATA CHAKRABORTY} % Your name
\address{1103 Yanceyville St, Apt C, Greensboro, NC 27405} % Your secondary addess (optional)
\address{+1 307-343-6827 \\ schakraborty@aggies.ncat.edu} % Your phone number and email
\begin{document}
%----------------------------------------------------------------------------------------
% OBJECTIVE
%----------------------------------------------------------------------------------------
\begin{rSection}{OBJECTIVE}
{``Winners are not people who never fail, but people who never quit". What I've learnt in an assignment is more important to me than what I already knew when I started. By virtue of my tenacity and hard work, I want to build a successful career in mechanical engineering and nanotechnology.}
\end{rSection}
%----------------------------------------------------------------------------------------
% EDUCATION SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{Education}
{\bf Master of Science in Nanoengineering} \hfill { Jan 2019 - Present}
\\
Joint School of Nanoscience\& Nanoengineering,\\North Carolina A\&T State University. GPA : 3.90/4
{\bf Bachelor of Science in Mechanical Engineering} \hfill { May 2012 - Mar 2017}
\\
Bangladesh University of Engineering\& Technology. GPA : 3.16/4
%Minor in Linguistics \smallskip \\
%Member of Eta Kappa Nu \\
%Member of Upsilon Pi Epsilon \\
\end{rSection}
%----------------------------------------------------------------------------------------
% TECHNICAL STRENGTHS SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{TECHNOLOGY SKILLS}
\begin{tabular}{ @{} >{\bfseries}l @{\hspace{6ex}} l }
Design Software & SolidWorks, AutoCAD. \\
Engineering Software & Abaqus, MATLAB, Ansys Mechanical APDL, COMSOL Multiphysics. \\
Programming Languages & Python, C, C++. \\
Office Accessories & MS Word, MS Power-point, MS Excel etc.\\
Hands-on Experience & Dismantling and re-assembling small and medium CI (diesel) and SI (gasoline)\\
& engines and performance testing.
\end{tabular}
\end{rSection}
%----------------------------------------------------------------------------------------
% WORK EXPERIENCE SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{WORK EXPERIENCE}
\sl\textbf{Graduate Research Assistant} \hfill Jan 2019- Present\\
JSNN, North Carolina A\&T State University\\\\
{\textbullet Analyzing the properties of Hybrid Composite prepared by HVARTM process.}\\\\
\sl\textbf{Graduate Teaching Assistant for ME-3020} \hfill Aug 2018 - Dec 2018 \\
University of Wyoming\\\\
{\textbullet Organizing the lessons for the lab and grading} \\
\sl\textbf{Mechanical Engineer} \hfill May 2017 - Jan 2018 \\
GPH Ispat Limited (Project of 0.8 MTPA Steel Plant)
{\textbullet Organized, planned and supervisied the erection of De-dusting Plant.}\\
{\textbullet Guided the erection and handling of heavy steel structures for the rolling mill.}\\
{\textbullet Supervised the welding of large ducts and pipes by providing the directions to the workers for choosing the right welding rod, current and voltage for the jobs and by checking the quality by Dye Penetrant Test.}\\
{\textbullet Supervised the paint job on ducts by measuring the thickness of the primer and secondary coatings.}\\
{\textbullet Analyzed designs of the units of Air-separation Plant and provided the feedback to the suppliers/contractors by correcting and modifying the compressor circuits (air and water) and specifications for the machinery as needed.}\\
{\textbullet Choosing the right lot of items(rod, bolt etc) by analyzing the sample properties (Tensile Test, Spectroscopy).}\\
{\textbullet Led the entire workforce in the erection and commissioning of Weigh-bridge a month ahead of the schedule.}\\
{\textbullet Executing all the plans in field by maintaining the proper coordination between the high level officials (DGM, AGM) and the field workers from the very beginning of the erection from the ground-zero.}
\end{rSection}
% EXAMPLE SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{INTERNSHIP/INDUSTRIAL TRAINING}
\sl\textbf{Bangladesh Steel Re-Rolling Mills (BSRM)} \hfill Aug 9 - Aug 27, 2016\\
{\textbullet Learned about the entire automation process under which the billets are changed to rods of different dimensions and strengths.}\\
{\textbullet Learned the features of various equipment like rolling machines, furnace, overhead crane, various pumps, spectroscopy etc.}
\end{rSection}
\begin{rSection}{PUBLICATIONS}
{1. \textbf{Shashwata Chakraborty}, Mohammad Uddin and Dr. Ajit Kelkar,``\textbf{Behavior of Glass/Carbon Nanoengineered Hybrid Composites for Aerospace Applications Under Mechanical Loading}" (Abstract Accepted), 2019 MRS Fall Meeting \& Exhibit, December 1-6 2019, Boston, Massachusetts.}\\
{2. Nandita Chakrabarty Jhumur, \textbf{Shashwata Chakraborty}, M A Gafur and Mohammad Abdul
Motalab,``\textbf{Com-\\parative Study of Mechanical Properties of PP, LDPE and EVA at Different Molding
Temperatures}", The 12th International Conference on Mechanical Engineering (ICME-2017), December 20-22
2017, Dhaka, Bangladesh.{\textbf{[https://doi.org/10.1063/1.5044286]}}.}\\
{3. \textbf{Shashwata Chakraborty}, Md. Yeashir Arafat, Saif Khan Alen and M. A. R. Sarker``\textbf{Design and Modeling of a Solar Dish Stirling Engine in the Perspective of Bangladesh}," The 11th Global Engineering, Science and
Technology Conference (GESTC-2015), December 18-19 2015, Dhaka, Bangladesh. \textbf{[ISBN: 978-1-922069-92-4]}}\\
{4. Md. Yeashir Arafat, \textbf{Shashwata Chakraborty}, Saif Khan Alen and M. A. R. Sarker``\textbf{Design and Modeling of a Solar Powered Absorption Refrigeration System}," The 11th Global Engineering, Science and Technology Conference (GESTC-2015), December 18-19 2015, Dhaka, Bangladesh.}\\
\end{rSection}
%----------------------------------------------------------------------------------------
\begin{rSection}{COMMUNITY SERVICE}
Badhon BUET Zone, {\sl Volunteer Member}: Awarded for Donating Blood over 10 times \hfill May 2012 - Feb 2017\\
\end{rSection}
\begin{rSection}{EXTRA-CURRICULAR ACTIVITIES}
{\sl \textbullet Murchona BUET, Co-editor.} \hfill 2013-14\\
Organized two inter-university cultural festival as the host.\\
{\sl \textbullet Inter-House Bengali Extempore Speech Competition.}\hfill 2010\\
Twice awarded as the Best Speaker\\
{\sl \textbullet Inter-House Hockey Competition.}\hfill 2010\\ Played as a striker and scored the highest goals with Hat-trick\\
{\sl \textbullet Bangladesh Mathematical Olympiad, Chittagong Region.}\hfill 2010\\
2nd Runner Up\\
\end{rSection}
%----------------------------------------------------------------------------------------
% REFERENCE SECTION
%----------------------------------------------------------------------------------------
\begin{rSection}{REFERENCE}
\begin{minipage}[h]{0.5\textwidth}
{\sl Dr. Ajit Kelkar\\
Professor and Nanoengineering Department Chair\\
Joint School of Nanoscience \& Nanoengineering,\\Greensboro, NC\\
Tel: (336) 285-2864\\
email:kelkar@ncat.edu\\
Relation: Supervisor \& Course Teacher}
\end{minipage}
\hfill
\begin{minipage}[h]{0.3\textwidth}
{\sl Dr. Md. Ashiqur Rahman\\
Assistant Professor\\
Dept. of Mechanical Engineering,\\
BUET, Dhaka-1000.\\
Tel: +88-01712274887 (Cell)\\
email:ashiqurrahman@me.buet.ac.bd\\
Relation: Course Teacher}
\end{minipage}
\hfill
\end{rSection}
\end{document}